CarterEQ
What's new in CarterEQ 1.9.0: separate ear EQ
See what's new in CarterEQ 1.9.0: separate ear EQ, preset behavior, audio-engine update checks, floating chip controls, and verified iOS support.
What's new in CarterEQ 1.9.0 is separate left and right ear control: each side gets its own level and ten EQ bands on top of your main EQ. The release also connects CarterEQ to Island's music player, while recent updates make it easier to check whether the running audio engine matches your installed version.
What's new in CarterEQ 1.9.0
CarterEQ is our system-wide equalizer for music, video, TikTok, and games, on speakers or headphones. Its main controls include a ten-band graphic EQ, preamp, Band Q, compressor, headphone crossfeed, and limiter.
Version 1.9.0 adds Left & Right Ears in the app under Hearing. Each ear has a level control ranging from −24 to +12 dB and its own ten bands, applied on top of the main EQ.
That creates two distinct sets of controls to keep track of: the shared main curve and the individual ear settings. If you change a main preset, do not assume that you have also replaced the separate ear adjustments.
The app includes Copy to Other Ear, Reset, and a test clip in the Hearing controls. In Settings → CarterEQ, you will find Separate Left and Right plus a level slider for each ear.
These are audio controls, not a diagnosis or a promise about how your setup will sound.
Keep main presets and ear settings separate
The important behavior in this release is that presets and Reset to Flat leave your ear settings alone. You can change the shared EQ without automatically discarding the individual adjustments.
To explore the new controls:
- Open the CarterEQ app.
- Go to Hearing.
- Inspect the separate level and ten-band controls for each ear.
- Use Copy to Other Ear if you want to copy an adjustment across.
- Use the Hearing controls' Reset when you want to reset those adjustments.
For the Settings controls, open Settings → CarterEQ → Separate Left and Right, then review the level slider for each ear.
CarterEQ includes twelve built-in presets, including Bass Boost, Vocal Boost, Loudness, and Rock. You can also save, load, and delete your own presets.
A practical way to keep track of changes is to adjust one part at a time. Record which main preset you selected and whether separate ear controls are enabled before making another adjustment.
The names matter when describing a result: saying “I used Reset to Flat” does not establish that the per-ear settings were reset. Include both sets of controls if you send a support request about behavior after changing presets.
Check the audio engine after an update
Installing a newer package and having the system audio engine run that version are separate events on iOS 17. The previous engine can keep running until audio restarts.
CarterEQ 1.8.65 added a check for the version the system audio engine is actually running. EQ Status now shows the installed version and whether that engine is up to date.
When needed after an update, the app offers Restart Audio to finish the change. Sound pauses briefly, then EQ returns on its own a few seconds later.
The same update changed Tools → Restart audiomxd so it re-attaches automatically instead of telling you to re-enable EQ afterward.
For initial activation on iOS 17 or later, EQ should start after installation. If EQ Status does not show path=ioproc, start playing audio and open Tools → Enable System EQ in the CarterEQ app.
For iOS 15–16, CarterEQ uses the mediaserverd path and provides Restart mediaserverd if it gets stuck. That path is being re-checked on this release.
When reporting an update problem, include the installed version and what EQ Status says about the running engine. That is more specific than reporting only that you installed the newest package.
Find the floating chip and Action button controls
The floating chip gives you another route to the EQ panel, which includes a volume slider and live output meters. Recent changes affect where the chip appears, so its absence over an app is not necessarily a failure.
Since 1.8.58, the chip appears on the Home and Lock Screens and hides while an app is open. To display it inside apps as well, enable Settings → CarterEQ → Show Chip in Apps.
Version 1.8.59 fixed the chip remaining invisible after it was enabled, particularly after a respring. Version 1.8.60 moved the EQ On/Off indicator below the Dynamic Island so its text stays readable.
On supported iPhones with an Action button, holding it can toggle EQ. Version 1.8.64 changed Settings so the Action Button section appears only on phones that have that hardware.
CarterEQ 1.9.0 also works with Island 1.3.0: Island's music player gains a CarterEQ tab with draggable bands, presets, and an on/off switch. That integration requires the corresponding Island version; the CarterEQ app and Settings pane remain separate ways to reach your controls.
Compatibility, price, and useful bug reports
CarterEQ costs $0.99 as a one-time purchase. It is also included in Tweak Pass, which costs $2.99 per month while active.
Install it from the CarterWare source, https://tweaks.carterware.net/, using package com.carterware.cartereq. CarterEQ requires Dopamine rootless and lists iOS 15 or later.
We tested CarterEQ on iOS 17.1; iOS 15–16 is being re-checked for this release. A listed version requirement is not a claim that every device and firmware combination has been verified.
If you encounter a problem, open Settings → CarterEQ → Report a Bug. This fills in your tweak version, iOS version, and iPhone model.
Describe the controls you changed, whether audio was playing, and what EQ Status showed. For a chip problem, say whether you were on the Home Screen, Lock Screen, or inside an app, and whether Show Chip in Apps was enabled.
You can also use the website's Report a bug form.
FAQ
Does Reset to Flat reset the separate ear controls?
No. Main presets and Reset to Flat leave your ear adjustments alone. Use the Reset control under Hearing for those adjustments.
Why is the chip missing while an app is open?
It hides inside apps by default. Enable Settings → CarterEQ → Show Chip in Apps if you want it displayed there.
Do I need to re-enable EQ after Restart Audio?
The update flow introduced in 1.8.65 brings EQ back automatically after the brief audio restart. Check EQ Status if the result is not what you expect.
After updating, check EQ Status, then open Hearing to review the new controls separately from your main preset. If something behaves differently from these steps, send the relevant settings and status details through Settings → CarterEQ → Report a Bug.