Current guide: charging watts, time to full and battery health
Set up Current to see charging watts, time to full and charger details on the Lock Screen, and read battery health and cycle count in Settings.
Version 1.0.1iOS 15 – 17Tested on iOS 16.3.1Free
Current shows what your charger is doing. While your iPhone charges, a small pill sits between the flashlight and camera buttons on the Lock Screen with the battery percentage, the watts coming in and when it will be full. Settings → Current shows your battery's health, cycle count and more, updating live.
Before you start
- A rootless jailbreak such as Dopamine on iOS 15 or later, with ElleKit and PreferenceLoader. Current is tested on iOS 16.3.1; iOS 15 and 17 use the same Lock Screen buttons but have not been tested yet. Not jailbroken yet? Use the jailbreak finder.
- An iPhone with the flashlight and camera buttons on the Lock Screen (iPhone X and later). On iPhones with a Home button the pill has nowhere to go, but the battery page in Settings still works.
- Current is free.
Set it up
- Add the CarterWare source
https://tweaks.carterware.net/in Sileo or Zebra (how to add a source) and install Current. - Respring (restart the Home Screen) when Sileo or Zebra offers it.
- Plug your iPhone in and look at the Lock Screen. A pill appears between the flashlight and camera buttons, for example 87% · 12.4 W with Full in 25 min underneath.
- Open Settings → Current to choose what the pill shows and to see your battery details.
The pill fades away when you unplug.
The pill also shows when you pull down Notification Center from the top of the screen while charging, and it stays on the dimmed Always-On display of iPhone 14 Pro and later.
Common tasks
See how fast your iPhone is charging
Plug in and wake the screen. The number in watts is the power coming from the charger right now. It changes as you use the phone and drops as the battery gets close to full, which is normal.
Check your battery health and cycle count
Open Settings → Current and look under Battery. Health is what your battery holds now compared with when it was new, Cycle Count is how many full charges it has been through, and Capacity shows both numbers in mAh.
Check whether a charger or cable is any good
Turn on Charger in Settings → Current. The second line of the pill shows the charger's rating, such as 20 W USB-C charger, and the first line shows the watts actually coming in. A rating far above what arrives usually means a slow cable, a busy phone or a battery that's nearly full.
Show the battery temperature
Turn on Temperature. It appears on the second line in °F or °C, following your iPhone's own temperature setting.
Settings explained
Every row on Settings → Current:
While your iPhone charges, a small pill between the flashlight and camera buttons on the Lock Screen shows what the charger is doing. It hides when you unplug.
- Enabled
- Switch · on by default
Master switch for the Lock Screen pill. Turn it off to hide the pill; the battery details in Settings keep working.
Lock Screen
Charging Speed is the power coming from the charger, in watts. Time to Full, Charger and Temperature share a second, smaller line; if they don’t all fit, the ones lower in this list are left out. Time to Full is an estimate that follows charging as it slows near the top. Changes show right away.
- Battery Percentage
- Switch · on by default
Shows the battery percentage at the start of the pill.
- Charging Speed
- Switch · on by default
Shows the power coming from the charger right now, in watts.
- Time to Full
- Switch · on by default
Shows an estimate of when the battery will be full on the pill's second line. While the last bit of charge goes in, it says Topping off instead.
- Charger
- Switch · off by default
Adds the charger's rating and type to the second line, like 20 W USB-C charger, MagSafe or Computer.
- Temperature
- Switch · off by default
Adds the battery temperature to the second line, in °F or °C following your iPhone's temperature setting.
Battery
Health compares what your battery holds now with what it held when new. A battery counts one cycle each time it has used 100% of its capacity, even across several charges. These update every two seconds while this screen is open.
- Health
- Status
What your battery holds now compared with when it was new, as a percentage.
- Cycle Count
- Status
How many full charges your battery has been through. One cycle can be spread across several partial charges.
- Capacity
- Status
The charge your battery holds now and what it held when new, in mAh.
- Status
- Status
The battery percentage and what's happening: charging with watts and time to full, topping off, paused, charged, or the power the iPhone is using on battery.
- Plugged Into
- Status
The charger you're plugged into, with its rating, or Nothing when unplugged.
- Battery Temperature
- Status
The battery temperature right now.
- Voltage
- Status
The battery voltage right now. It rises as the battery fills.
Support
Opens a short form in Safari with your tweak version, iOS and iPhone model already filled in. Every report reaches the developer.
- Report a Bug
- Button
Opens a short bug form in Safari with your Current version, iOS version and iPhone model already filled in.
What the pill says
- Full in 25 min: charging normally, with an estimate of the time left.
- Topping off: the percentage reads 100% but the battery is still taking the last bit of charge.
- Paused: plugged in but not charging. Usually Optimized Battery Charging holding at 80%, or the battery is warm.
- Draining with Charger can't keep up: the iPhone is using more power than the charger gives, so the battery goes down even while plugged in.
- Charged: full.
Troubleshooting
The pill doesn't show up
Make sure Enabled is on in Settings → Current, the iPhone is plugged in, and you've resprung once since installing. The pill sits with the flashlight and camera buttons, so if another tweak hides those buttons, it hides the pill too.
Time to Full jumps around
The estimate comes from how fast the battery is filling right now, so it moves when you start or stop using the phone. Give it a minute after plugging in. Near the top, charging slows on purpose and the estimate follows.
Health is different from Apple's Battery Health
Current compares the capacity your battery reports now with its original capacity. Apple rounds and calculates its number a little differently, so the two can differ by a point or two.
Something shows Not reported
Your iPhone didn't report that value. This can happen on some models or iOS versions; the rest of the page still works.
Questions
Is Current free?
Yes. Current is free, with no ads and nothing to unlock.
Does Current drain the battery?
No. It only reads the battery every two seconds while the Lock Screen is lit and the iPhone is plugged in, and stops completely when the screen turns off or you unplug.
Can I see my battery cycle count on iOS 16?
Yes. Stock iOS 16 doesn't show it anywhere, but Settings → Current shows the cycle count, health and capacity.
Why are the watts lower than my charger's rating?
A charger's rating is its maximum. Your iPhone only draws what it needs, which depends on the battery level, temperature and what you're doing. It's normal to see the full rating only when the battery is low and the phone is cool.